When ordering a replacement steering column for your Corsa D, there are several key points to check in order to ensure you get the correct part and avoid problems with fitment.
Confirm the Corsa D Generation and Build Date
Gen/Build Date: The Corsa D ran from 2006 to 2014 and was subject to a mid-life facelift in late 2010. Although pre- and post-facelift models have largely identical interiors, steering column assemblies are not identical for pre- and post-facelift models. So check the build date on the car’s VIN number located on the door post near the VIN number label. The year of first registration does not necessarily denote the generation of your car.
Identify Whether Your Column Has EPS
Check whether your car has an EPS (Electric Power-Assisted) steering column. Check your current steering column for an electric motor on the shaft. A non-assisted column cannot be used as a substitute for an EPS column. There is more on Vauxhall Corsa Steering Column at westernpowersteering.co.uk/vehicles/vauxhall/vauxhall-corsa-d-steering-column/.
Cross-Reference the OEM Part Number
Check the Lower Universal Joint Spline Count
Lower Universal Joint Spline Count. As mentioned earlier the splines and diameter on the Lower Universal Joint can differ from model to model. We have had cases where people have ordered the wrong part because they have incorrectly counted the splines on the Lower UJ of their steering column, leading to extra cost and also extra time as they have to return the item.
Check Whether the Ignition Barrel Is Included
Check whether or not the ignition barrel and lock module are included with the column. If you are supplied a steering column with an ignition barrel and it is currently fitted to another ECU then the immobiliser will stop the car from starting as the barrel is paired to the ECU it was removed from.
This will save you the cost of return postage and time for an incorrect order.
+ There are no comments
Add yours